The Automatic Drying Rate Tester is used to determine the evaporation time and evaporation rate when the specimen is being dropped a certain amount of water.

The test method

1.      To place a specimen on a flat table and drop a certain amount of water onto the center of the specimen. After the water is absorbed, hang the specimen vertically and weigh the specimen weight with absorbed water.

2.      Periodically check the weight of the specimen and monitoring the evaporated water amount until the test end condition is met.

3.      Then stop the test and calculate the evaporation time and evaporation rate.

The RF4008ADRT adopted a new design concept. The tester is divided into threes layers, the specimen preload area, the test area and the tested specimen collection area. The tested is fully automated, max. 80 specimens can be installed at the same time, and each specimen can be lifted to the test area to perform a series of actions, such as automatic laying the specimen to horizontal position, automatic water dripping, automatic detection of water diffusion, automatic weighing the dry weight and wet weight of specimens, automatic pick up the specimen, automatic queue weighing, automatic calculation of drying rates, etc. All functions are automatically executed, and after a batch of samples are placed, unmanned testing can be achieved under black light conditions.

Test Scope:  Knitted fabrics and quick-drying fabrics。

Testing Standards:  GB/T21655.1, etc.

Specification:

1.      13.3” Touchscreen operation, easy to operate.

2.      The test can be done without PC connection.

3.      Specimen Loading Area: Max. 80 specimens.

4.      Specimen Testing Area: Max. 6 specimens.

5.      Specimen Collection Area: Max. 80 specimens.

6.      Specimen Automatic Picking Up.

7.      Specimen Automatic Laying Horizontally.

8.      Automatic Water Dripping.

9.      Automatic Weighing.

10.  Automatic Queue Weighing with Intelligent Queuing Weighing System.

11.  Working Position (Specimen I.D.) automatic recognition.

12.  Water Absorption is Automatic Detected.

13.  Automatic Calculation of Drying Rate.

14.  Water Dripping Accuracy：0.03-0.45ml±0.003ml.

15.  Max. Specimen Weight：50g.

16.  Weighing Accuracy: 0.001g.

17.  Specimen Size：100x100mm.

18.  Weighing Time Intervals Can be Set.

19.  PC software for data saving and report printing.

20.  PC software collects testing data and displays curves and data and the calculated results.

21.  Interface: USB Cable.

22.  Power: 230V，50/60Hz.

23.  Dimension: 1600(L)×660(W)×1700(H)mm.

24.  Weight: about 280kg.

Ordering Information:

RF4008ADRT             Automatic Drying Rate Tester

RF4008 ADRT /1        USB Cable

RF4008 ADRT /2        Specimen Holder

RF4008 ADRT /3        Weighing Device