Heat Keeping Tester is used to determine the thermal property of fabrics.

1.     Sample is put on a constant temperature heated plate, and vertical air flow is directly applied on the top surface of the sample.

2.     Measure the heat loss flow through sample, and calculate the heat keeping capacity.

3.     Wind Tunnel automatic up and down.

4.     Specimen transfer automatically, reduce the error caused by manual operation.

5.     Touchscreen operation. 

Four Testing Modes:

1.  Dry Contact Method: Sample directly contacts the heated plate.

2.  Wet Contact Method: Sample directly contacts the wet filter paper which is put on the heated plate.

3.  Dry Space Method: Sample is placed over the heated plate with a constant distance space.

4.  Wet Space Method: Sample is place over the heated plate with a constant distance space and a wet filter paper is put on the heated plate.

Test Scope： Textile fabrics, Leather, Cosmetics, Automotive Interior, Medical Products, etc.

Testing Standards： KES Methods  

Specifications:

1.     Heat Plate： 100cm2 Aluminum, 1mm thickness

2.     Guarded Ring：130x130mm Aluminum, 6mm thickness

3.     Polystyrene Foam Specimen Rack (for Direct Contact Tests)

a)       Inner Opening: 100mm x100mm, Square

b)       Outer Dimension: 230×230mm

c)       Thickness: 2mm

4.     Outer Frame for Specimen Rack

a)       Outer Dimension: 230×230mm

b)       Thickness: 6mm

5.     Spacer（for Dry or Wet Space Tests）

a)       Bakelite

   i.            Outer Dimension: 230×230×6mm

   ii.            Inner Opening: 204×204mm

b)       Polystyrene Foam

   i.            Outer Dimension: 204×204×5mm

  ii.            Inner Opening: 100×100mm

6.     Wind Tunnel

a)       Inner Diameter: 14.8cm

b)       Air Flow Speed：0 – 1.5m/s

7.     Touchscreen Control

8.     PC Software for Data Record and Report

9.     Power：230V，50/60Hz, 2.5A

10.  Dimension：600(L)×400(W)×500(H)mm

11.  Weight：Approx. 100kg 

Ordering Information：

RF4008HK          Heat Keeping Tester